Home > Products > Diaphragm Compressor Series > ML series diaphragm compressor
  • ML series diaphragm compressor

ML series diaphragm compressor

Brand : Jinding

Product origin : Liaoning,China

Delivery time : 10-30 days

Supply capacity : 30 sets / month

ML series diaphragm compressor


  Diaphragm compressor driven by the motor, the crankshaft rotation through the pulley, and then through the connecting rod so that the reciprocating piston cylinder reciprocating motion, pushing the oil, so that the diaphragm reciprocating vibration, under the control of the inlet and exhaust valve, diaphragm vibration Once, that is to complete an intake and exhaust process. Film press work, a small amount of oil in the cylinder through the piston ring jade ring wall and the gap between the tank leakage to the tank. In order to compensate for this part of the oil, so that the diaphragm at the end of the compressor can close the surface of the cylinder head, drain the compressed media, the compensation pump in the film compressor suction oil into the cylinder, slightly more than the oil leakage Amount of excess oil at the end of the compressor stroke, through the control of the pressure regulator valve back to the crankcase.


  As the diaphragm will be completely separated cylinder and cylinder, the compressed medium is not in contact with the oil, thus avoiding oil pollution, to ensure the purity of the compressed medium. Cylinder cylinder head surface and the membrane composition, is a closed cavity, it has a good seal.


  Diaphragm compressor is a special structure of the reciprocating compressor, compression ratio, sealing, compressed gas from lubricating oil and other solid impurities contaminated for compression of high purity, rare, flammable, Toxic and harmful, corrosive and high pressure gas.


  L series diaphragm compressor cylinder axis is L-shaped layout. Horizontal and vertical advantages, better dynamic balance performance, stable operation than the vertical.


Product model

Volume flow
Nm 3/h

Intake pressure
MPa(G)

Exhaust pressure
MPa(G)

Rotating speed
r/min

Compressor shape size
(L×W×H)mm

Weight
t

Water consumption
t/h

Power
kW

ML-40/200

40

normal pressure

20

400

3340×1570×1900

4.0

3.0

37

ML-240/20-200

240

2

20

400

3340×1900×2157

4

4.6

55

ML-330/7-26

330

0.7

2.6

400

3570×1590×2200

4.2

3.3

45

ML-200/20-150

200

2

15

400

3340×1670×2360

3.8

4.5

45

ML-150/6-200

150

0.6

20

400

3450×1400×2400

3.8

5

55

ML-300/5-30

300

0.5

3

400

3450×1450×2400

4.0

4.3

55

ML-200/10-150

200

1

15

400

3340×1450×2400

3.8

2.5

45

ML-300/6-30

300

0.6

3.0

400

3300×1700×2360

4.0

4.3

45

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone :

  • *Message :
    Message