Home > Products > Acetylene Compressor > Acetylene Diaphragm Compressors > M2V-20 / 1-25 diaphragm compressor

M2V-20 / 1-25 diaphragm compressor

Brand : Jinding

Product origin : Liaoning,China

Delivery time : 10-30 days

Supply capacity : 30 sets / month

Acetylene diaphragm compressors


(一) Diaphragm compressor introduced

Diaphragm compressor driven by the motor, the crankshaft rotation through the pulley, and then through the connecting rod so that the reciprocating piston cylinder reciprocating motion, pushing the oil, so that the diaphragm reciprocating vibration, under the control of the inlet and exhaust valve, diaphragm vibration Once, that is to complete an intake and exhaust process. Film press work, a small amount of oil in the cylinder through the piston ring jade ring wall and the gap between the tank leakage to the tank. In order to compensate for this part of the oil, so that the diaphragm at the end of the compressor can close the surface of the cylinder head, drain the compressed media, the compensation pump in the film compressor suction oil into the cylinder, slightly more than the oil leakage Amount of excess oil at the end of the compressor stroke, through the control of the pressure regulator valve back to the crankcase.


(二) Diaphragm compressor features

As the diaphragm will be completely separated cylinder and cylinder, the compressed medium is not in contact with the oil, thus avoiding oil pollution, to ensure the purity of the compressed medium. Cylinder cylinder head surface and the membrane composition, is a closed cavity, it has a good seal. Compressor compression process is more similar to the isothermal compressor, compared with the piston compressor can take a higher compression ratio, the corresponding compression series less, so the machine compact structure, small size.


Our company independently produced diaphragm compressor its main features are as follows:

1. The gas does not come into contact with any medium, suitable for high purity gas.

2. The compressor seal is good, do not leak.

3. The new cavity curve to improve the compressor volumetric efficiency, and improve the vulnerability of diaphragm, valve life.

4. A fully functional independent pump pumping station, for the compressor lubrication and cylinder work provides a stable pressure, clean, well-cooled lubricant.

5. The whole structure is compact and reasonable, easy to transport equipment, installation and maintenance; smooth and reliable operation, small vibration, low noise.


Product model

Volume flow
Nm 3/h

Intake pressure
MPa(G)

Exhaust pressure
MPa(G)

Rotating speed
r/min

Compressor shape size
(L×W×H)mm

Weight
t

Water consumption
t/h

Power
kW

M2V-20/1-25

20

0.1

2.5

400

1450×845×1120

0.85

0.5

5.5

M3V-50/1-25

50

0.1

2.5

400

1860×890×1235

1.8

1.0

15

MD130-80/1-25

80

0.1

2.5

400

3000×2100×1625

4.2

4.2

22

Please feel free to give your inquiry in the form below.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :
    Message